大肠杆菌吸附-化学还原法用废含金催化剂制备金纳米线

采用大肠杆菌吸附-化学还原法,以大肠杆菌(ECCs)为模板、十六烷基三甲基溴化铵为保护剂、抗坏血酸为还原剂,由废含金催化剂制备金纳米线(AuNWs)。采用XRD,SEM,TEM等技术对AuNWs进行表征。研究了AuNWs对罗丹明6G(R6G)和4-巯基苯甲酸(4-MBA)的拉曼散射信号的增强效果。实验结果表明:在制备过程中加入微生物ECCs,可使金回收率提高约20百分点;当溶液pH小于4时,反应2 h后,有大量呈线状的AuNWs聚集沉降,金回收率可达99%1以上。表征结果显示,AuNWs呈多晶结构,晶格间距为0.23 nm。表面增强拉曼散射分析表明,AuNWs对R6G和4-MBA具有良好的拉曼光谱增强性能。     

Safety assessment of the film boiling chemical vapor infiltration (FB-CVI) process through a system-theoretic accident model and process (STAMP)

Film boiling chemical vapor infiltration (FB-CVI) is considered as one of the fastest process methodologies for manufacturing carbon-carbon (C–C) composite products and possesses various advantages compared to conventional methodologies. However, there are safety concerns associated with this process for large-scale manufacturing, mainly owing to the intrinsic nature of the precursor and the process conditions. Considering the multifunctional interactions of the various systems during the process, a system-theoretic process analysis (STPA)/system theoretic accident model and process (STAMP) model is used to perform a safety analysis of the hazardous states of the FB-CVI process at the system level. As a case study, the FB-CVI process equipment employed for the manufacturing of C–C composites is considered. The safety constraints present in the system are assessed for adequacy through a hazard analysis by STPA/STAMP. The analysis through STPA/STAMP demonstrated the capability to create proactive strategies for the design and realization of process equipment that can be employed to manufacture C–C composite products through the FB-CVI process.     

水中藻类对连续流动法测定总氮结果的影响

以天津市河道、水库为研究对象,在藻类增殖期采用连续流动法与碱性过硫酸钾消解法对水体中总氮进行比对监测,同时分析水中藻类分类和藻细胞密度。试验表明:虽然两种方法测定总氮的结果精密度基本相同,但二者之间的系统误差存在显著差异,连续流动法较碱性过硫酸钾消解法的测定结果低5.4%。两种方法测定总氮结果的相对偏差与水体中藻细胞密度呈正相关性,当水体中藻细胞密度﹥2.41×108L-1时,对连续流动法测定总氮的结果产生显著影响,相对偏差超过标准规范要求。     

水中总氮测定方法存在问题的研究及改进

碱性过硫酸钾消解紫外分光光度法测定水中总氮采用的消解器皿是玻璃比色管,易造成空白偏高、结果偏低等问题。采用双圆柱状的消解杯对水样进行消解。结果表明,消解杯消解水中总氮,线性相关系数均大于0.999,检出限为0.05 mg/L,相对标准偏差小于5%,相对误差为0.88%~1.00%;改进后的消解器皿具有较好的精密度和准确度,能够更加准确测定水中总氮的含量。     

Review: recent advances in biogas purifying technologies

Biomethane production through biogas upgrading is a promising renewable energy for some industries which could be part of the equilibrium needed with fossil fuels consumption to achieve a sustainable society. This paper presents a comprehensive list of biogas upgrading technologies focused on carbon dioxide removal as well as recent advances reported by researcher with wide expertise in this topic. Additionally, an extensive costs–performance comparison among the technologies studied is discussed. Among the different alternatives, chemical scrubbing stood out to achieve high biomethane purities while cryogenic technologies proved to be effective against methane losses. Regarding the different costs, water scrubbing and membrane separation seem to be the most affordable techniques.     

淮河支流污染物综合降解系数动态测算

确定河流污染物综合降解系数动态变化规律对提高水环境容量测算精度和水环境管理具有重要意义。通过现场模拟法,采用一维稳态模型测算了淮河支流洪河五沟营-塔桥乡河段COD、氨氮和总磷在枯水期、平水期和丰水期的综合降解系数,COD、氨氮和总磷降解系数在各水期的关系为枯水期平水期丰水期,提出了建议值并利用实测浓度对计算结果进行了检验,结果表明,不同水期综合降解系数吻合情况较好。     

活性炭吸附和两级Fenton氧化组合工艺处理高盐对氨基苯酚生产废水

采用活性炭吸附和两级Fenton氧化组合工艺对高盐度对氨基苯酚生产废水进行了处理实验研究。结果表明,p H值对活性炭去除有机物的影响较小。当活性炭投加量为4 g/L时,TOC去除率61%。分级加药可以有效提高Fenton氧化对有机物的去除效率。在温度为25℃、p H为3、30%H2O2投加量为3%(V/V)、Fe2+/H2O2摩尔比为0.05时,两级Fenton氧化处理后,出水TOC降至150 mg/L以下。此外,Fenton氧化后形成氢氧化铁污泥颗粒粒径为4.5μm,经过聚丙烯酰胺(PAM)絮凝之后,污泥的粒径明显增加,过滤特性改善。PAM絮凝效果依赖于溶液的p H值,当p H超过10后会失去作用,故在使用过程中需要严格控制溶液的p H值。     

A new approach to Assess Atmospheric Nitrogen Deposition by Way of Standardized Exposition of mosses

A standardized method of moss exposition for assessing variations in nitrogen deposition was tested in the western part of Germany. Six pleurocarpous moss species were transplanted to two sites differing in their deposition rates but being comparable as to their climatic conditions. The mosses were exposed in standardized containers over a period of 12 months; the focus of interest was the effect of N deposition on nitrogen content and on ¹⁵N natural abundance (δ¹⁵N-values). Within the first nine months only trends could be observed. However, after one year all species tested showed significantly higher N concentrations at the highly polluted site. Besides, more negative δ¹⁵N-values possibly reflecting the higher ammonium input were detected at this site. Surprisingly, most of the plants though being kept in plastic containers without a favourable substratum did not show any conspicuous deficiency symptoms. The potential advantages of a standardized moss exposition for N monitoring purposes are discussed. It is concluded that the method presented here can yield significant results in particular if the number of testing sites is increased.     

生物絮凝剂MBFGA1预处理乳制品加工废水

用生物絮凝剂MBFGA1预处理乳制品加工废水（简称废水）。实验结果表明，废水处理的水力条件为：以150r／min的转速搅拌30S，再以30r／min的转速搅拌20min；MBFGA1的最佳加入量为15mg／L；废水pH为4．0时，MBFGA1对废水的絮凝处理效果最好；废水温度对浊度、COD去除率有一定的影响，在20～45℃时，废水浊度的去除率始终保持在85％以上；30℃时，COD去除率达到最大值65．0％。